Manual Mill Milling Accessories

Ball endmills are used when you want to cut a rounded groove. Great for die makers. This set includes 1/8”, 3/16”, 1/4”, 5/16”, and 3/8” sizes, with 3/8” shanks; 7/16”, 1/2”, and 5/8” with 1/2” shanks; and 3/4” with a 3/4” shank.

The size you need is close at hand with this set of two- and four-fluted end mills. Includes sizes 3/16”, 1/4”, 5/16”, 3/8”, and 7/16” (3/8” shank); 1/2” and 9/16” (1/2” shank); 5/8” and 11/16” (5/8” Shank), and 3/4" (3/4" shank), all in a wooden case.

This versatile set has all the most popular sizes, including 1/8”, 3/16”, 1/4”, 5/16” and 3/8” sizes with 3/8” shanks, and a 1/2” with a 1/2” shank.

2- and 4-flute double-sided end mills with 3/16" shank. 1 each of 2- and 4-flute -- 1/16", 3/32", 1/8", 5/32" and 3/16". 10 pieces total.

Save money with this set of four-fluted HSS end mills. This set of mill contains five 3/8” shank end mills including: 1/8”, 3/16”, 1/4”, 5/16”, and 3/8”. Includes one 1/2" end mill with 1/2" shank. The mills have a Weldon Shank.

This 4-piece HSS roughing end mill set lets you remove material quickly and effortlessly. Set includes 1/4”, 5/16”, 3/8” on 3/8" shanks and 1/2” on 1/2" shank. The mills have a Weldon Shank.

Plunge cut and take larger cuts with these center cutting Tin-coated, single end mills. These long-lasting sets contain sizes: 3/16”, 1/4”, 5/16”, 3/8”, and 7/16” with 3/8” shanks; 1/2” and 9/16” with 1/2” shanks; 5/8” and 11/16” with 5/8” shanks; and 3/4” with a 3/4” shank.

Machine slots, keyways, and splines in large gears with this 4 x 1/16” HSS cutter with 1" center hole. Ideal for general-purpose slotting and cut-off operations, this 36-tooth cutter fits Saw Arbor #65-055 for the machines with an R-8 Spindle. Use stub arbor, 65-075 for machines with an MT3 spindle.

Mount a side cutter or slitting saw in your R-8 millhead with this arbor. Precision-ground and hardened, this arbor features a R-8 shank, four T-Spacers (1”,1/2”, and 2 1/4”) to adjust blade depth, and a locking nut with reverse threads to lock the cutter. 1" Diameter. For use with machines that have an R-8 mill spindle.

Use this adapter sleeve to hold large capacity MT3 taper shank drills in your R-8 taper mill/drill machine.

This end mill adapter is the most secure way to hold your end mill. Bored to accept the exact shaft size of the end mill and secured with a set screw, end mills will not move or flex during your milling operation.

These end mill adapters are the most secure way to hold your end mill. Bored to accept the exact shaft size of the end mill and secured with a set screw, end mills won't move or flex during your milling operation.

Use with a standard R8 3/4" collet for quick tool changes. Tool holders are designed to "bottom out" on the face of the R8 collet, giving you a fixed height each time.

Mill large, flat surfaces quickly and accurately with these cutters. Easier to use than a fly-tool cutter, it's shank fastens to the millhead drawbar. Includes three square indexable inserts (SPG422) and screws. Fits R8 taper spindles - Granite machines and stand-alone mills. Replacement inserts 68-015. Replacement screws, 68-018.

This customer installed powerfeed drives the MI-329M X-axis for fine finishes. Features variable speeds with high-speed override and limit switch. Check with a service technician about compatibility if you already own a milling machine. PDF install instructions available. Powerfeeds are 110v power to match with the MI-329M, which is also wired in 110v power.

Pull these collets up into your millhead spindle with a drawbar. As the collet pulls up, it tightens around the piece you're mounting. Use with 3/8” drawbar. Item K99-273 Collet Kit includes all listed collets. (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4")